Welcome to Alliance Refractories, Western Canada's Refractory Experts. Contact us for quality solutions!


Alliance Refractories has recently established an office in Bonnyville, Alberta.  Please get in touch with us to discuss both your refractory and CO2 dry ice cleaning requirements.

Dry ice cleaning can quickly remove almost any in-situ bitumen production facilities contaminant.  Our Dry Ice Cleaning capabilities are able to clean heat exchangers, bitumen residues, lime softener filters, plant systems, and much more!

Alliance Refractories dry ice cleaning is an efficient and cost-effective way for industries to maximize production capabilities and quality.  Dry ice cleaning is similar to sand blasting, plastic bead blasting or soda blasting where media is accelerated in a pressurized air stream to impact a surface to be cleaned or prepared.  However, instead of using hard abrasive media to grind on a surface (and damage it), dry ice cleaning uses soft dry ice, accelerated at supersonic speeds, and creates mini-explosions on the surface to lift the undesirable item off the underlying substrate.

For more information please contact us!

Refractories play a crucial role in the cement industry.  Rotary kilns, high volume static equipment, burner pipes and many more systems that are exposed to high temperatures, corrosive, or harsh environments use refractory systems to shield them.  Each stage of the cement-making process places unique demands on the refractory lining.  Refractory selection is influenced by the kiln design, fuel burned, raw meal and operating characteristics.  Refractories play a crucial role in maintaining a productive, safe, and efficiently operating system.  Some areas in the Cement industry where refractory is commonly used are:

  • Rotary Kilns
  • Kiln Hoods
  • Burner Pipes
  • Preheaters (Cyclones, Ducting, Caclciners)
  • Meal Pipes
  • Coolers
  • Tertiary Air Ducts

Refractories play a significant role in the petrochemical and chemical industry.  These industries demand high quality and solutions to improve performance.  Alliance Refractories is dedicated to working with our clients to select to best product for the application.  In the petrochemical industry our solutions can be seen in:

  • SRU (Sulphur Recovery Units)
  • Combustion Chambers
  • Fluid Catalytic Crackers (FCC)
  • Fired Heaters
  • Catalytic Reformers
  • Reaction Furnaces
  • Heat Exchangers
  • Sulphur Burners
  • Ethylene Crackers
  • Petroleum Coke

Alliance Refractories has been providing refractory solutions to the pulp and paper industry for a long time, and their expertise and quality is evident.  The pulping process utilizes a series of recovery processes which includes two major systems the Chemical Recovery Boiler and the Recovery Kiln.  With our knowledge and expertise in refractory not only can Alliance help in the refractory selection, but they are also able to recommend and design specialized refractory lining systems.

Alliance is heavily involved in the fertilizer industry.  From the initial process where the primary reformer creates hydrogen from a natural gas feedstock at temperatures over 1800°F, Alliance Refractories works with the client to design and install the best refractory system for the situation.  When temperatures reach 2800°F in the Secondary Reformer, clients can be confident that Alliance has installed a long lasting refractory system that will keep the unit safe and operational.  Units in the fertilizer industry that utilize refractory systems are:

  • Primary Reformers
  • Secondary Reformers
  • Hydrogen Transfer Lines
  • Waste Heat Boilers

In the chemical processing industry when selecting refractory careful consideration must be giving to the hostility of the environment.  The refractory selected for the job must not only withstand the temperatures but the environment.  Reliability and safety are key elements in the Chemical processing industry, whether it be with brick, monolithics or ceramic fiber, the design should be suitable for the operating conditions as well as the equipment and construction circumstances.  With these considerations in mind Alliance’s industry experts time and time again deliver high quality solutions.

Alliance Refractories has designed many systems for the steel making industry.  From specialized precast refractory shapes to bricking solutions to ceramic fiber solutions, the industry experts at Alliance are committed to high quality solutions. Systems in the steel industry that utilize refractory are:

  • Blast Furnaces
  • Troughs
  • Electric Arc Furnaces
  • Walking Beams / Reheat Furnaces
  • Incineration
  • Coal Fired Power
  • Hydrogen Plants
  • OSB/Wood Energy
  • Hydrocarbon Processing
  • Coal Mining
  • Utilities
  • Cement
  • Petrochemical
  • Pulp & Paper
  • Fertilizer
  • Steel
  • Chemical Processing
  • And More!

Comments are closed.


    16650-111 AVE.
    T5M 2S5

    831-48 AVE. SE
    T2G 2A7

    T9K 0T4

    5026-56 AVE.
    T9N 2N8

    1661 PARK STREET
    S4N 5A2

    11211 TWIGG PLACE
    V6V 3C9


        ALBERTA TOLL FREE      1.877.440.6111
        EDMONTON                    780.413.6111
        CALGARY                         403.225.8539
        FORT McMURRAY           780.743.5011
        BONNYVILLE                   780.812.2153
        REGINA                            639.571.0893
        RICHMOND                     604.294.2753